Class 10-12 Status Codes; Customer Service; Operation In Dusty Environments - Fronius Symo 10.0-3 208-240 Instructions De Service

Code Description
Provides information about the
767
internal processor status
Power limit different in the
768
hardware modules
772 Memory unit unavailable
Software update group 0 (in-
773
valid country setup)
PMC power stage set unavail-
775
able
776 Invalid device type
781– Provides information about the
794 internal processor status
*) If status code persists: Contact a Fronius-trained service technician
Class 10–12 Sta-
1000–1299 – Gives information regarding the internal processor program status
tus Codes
Description

Customer Service

IMPORTANT! Please contact your Fronius dealer or a Fronius-trained service technician if
-
-
Operation in When operating the inverter in extremely dusty environments:
dusty environ- when necessary, clean the cooling elements and fan on the back of the inverter and the
ments supply air openings in the mounting bracket using clean compressed air.
Behavior
Warning message on the
display
Warning message on the
display
Warning message on the
display
This is of no concern if the inverter is functioning without prob-
lems and it appears only in the "PS Status" setup parameter. In
the event of an actual fault, this status code supports Fronius
Technical Support in the failure analysis.
an error appears frequently or for a long period of time
an error appears that is not listed in the tables
Remedy
*)
Press the '"Enter" key to confirm
the error; *)
*)
57