Values Displayed In The Log Menu Item - Fronius Symo 10.0-3 208-240 Instructions De Service

Solar current (V) - from I PV1 and I PV2, if there is one
Fronius Eco: The total current from both measuring channels is displayed. Both channels
are shown separately in SolarWeb.
Time/date - time and date on the inverter or in the Fronius Solar Net Ring
Values Displayed
Output energy (kWh/MWh)
in the LOG Menu
energy supplied during the monitored period
Item
Due to the variety of different monitoring systems, there can be deviations between the
readings of other metering instruments and the readings from the inverter. For determin-
ing the energy supplied to the grid, only the readings of the calibrated meter supplied by
the electric utility company are relevant.
Maximum output power (W)
highest power of feeding into the grid during the monitored period
Yield
money earned during the monitored period (set currency and rate in Setup menu)
As was the case for the output energy, readings may differ from those of other instru-
ments.
Section "Setup Menu" section describes how to set the currency and rate for the energy
supplied.
The factory setting depends on the respective country-specific setup.
Maximum grid voltage (V)
highest reading of grid voltage during the monitored period
Maximum solar voltage (V)
highest reading of solar voltage during the monitored period
Operating hours
indicates how long the inverter has been operating (HH:MM).
IMPORTANT! The time must be set correctly for day and year values to be displayed
properly.
29