Fronius Symo 10.0-3 208-240 Instructions De Service page 32

32
The feed-in tariff is displayed.
The tens digit flashes.
Use the "Up" and "Down" keys to se-
5
lect a value for the tens digit.
Press the "Enter" key
6
The units digit flashes.
Repeat steps 5 and 6 for the units dig-
7
it and for the three digits after the dec-
imal point until ...
the set feed-in tariff flashes.
Press the "Enter" key
8
The feed-in tariff is applied; the overview
of the values that can be set is displayed.
Press the "Esc" key
9
The Setup menu item "Energy yield" is
shown.