Publicité
Les langues disponibles
Les langues disponibles
Lastly, you can press the Source Settings or Load Settings key to access the respective Settings window.
Use the navigation keys to highlight the voltage, current, resistance, or power fields. Then enter the output values
with the numeric keys. You can also use the knob to adjust the values in the value fields for output accordingly.
Press [Enter] to enter the value. Press Back to return to the meter-view display.
Power Supply mode
Load mode
Refer to
Programming Ranges
for the output range and its default value.
Step 4 - Enable the output
Press the color-coded [On] key to enable the output. When an output is on, the [On] key for that output is lit. When
an output is off, the [On] key is not lit.
The state of a disabled output (output off) is a condition of zero output voltage and zero source current.
Step 5 - View the output voltage and current
Press [Meter View] to view the output voltage and current. When an output is enabled, the front panel meters
continuously measure and display the voltage and current either output or sense terminal.
Power Supply mode
Keysight E36731A User's Guide
67
Publicité
