Keysight E36731A Manuel D'instructions page 16

Front panel at a glance
Item
1 Information-packed, high contrast 4.3-inch LCD color display; easily viewable even from sharp angles
2 Voltage and Current knobs
Set the output voltage and current. These knobs are active in Meter View, Scope View, Data Logger View, and Source/Load Settings
page.
3 Meter View, List Run/Stop, and Scope/Datalog keys
– [Meter View] turns on the meter view for the selected output.
– [List Run/Stop] runs or stop output sequencer list.
– [Scope/Datalog] toggles between Scope view and Data Logger view.
4 Navigation keys
– Navigate through the control dialog windows; press [Enter] key to select a control.
5 Numeric keypad
– Enters numeric values. Press [Enter] key to complete the entry.
– Deletes the values entered into the dialog using the back key.
6 Input/Output terminals
7 Sense terminals
8 Earth ground reference
9 Power key and LED indicator
Turns on the instrument. If the LED is amber, the instrument is in standby mode with AC inlet power connected, and if it is green, the
instrument is on.
10 Input/Output On key
Turns the output On or Off; output is on when the key is lit.
16
Description
Keysight E36731A User's Guide