Keysight E36731A Manuel D'instructions page 27

Prepare Instrument for Use
Initial inspection
When you receive your instrument, inspect it for any obvious damage that may have occurred during shipment. If
there is damage, notify the shipping carrier and nearest Keysight Sales and Support Office immediately. Refer to
www.keysight.com/find/assist.
Until you have checked out the instrument, save the shipping carton and packing materials in case the unit has to be
returned. Check the list under
instrument. If anything is missing, please contact your nearest Keysight Sales and Support Office.
Standard shipped items
– Keysight E36731A battery emulator
– AC power cord
– Certificate of calibration
– One 10 A, 3.5 mm female 4-pin terminal connector (P/N: 0360-3139)
– One 8 A, 3.5 mm female 2-pin terminal connector (P/N: 0360-3191)
– One 85 A, 12 mm 2-pin mating connector (P/N: 1253-7187)
– One 80 A detachable binding post assembly (P/N: E36154-60003)
Documentation and firmware revisions
The Keysight E36731A documentation listed below can be downloaded for free through our website at
www.keysight.com/find/e36731amanuals.
– Keysight E36731A Battery Emulator User's Guide. This manual.
– Keysight E36731A Battery Emulator Quick Start Guide
– Keysight E36731A Battery Emulator Programming Guide
– Keysight E36731A Battery Emulator Service Guide
For the latest firmware revision and firmware update instruction, go to www.keysight.com/find/e36731afirmware.
Recommended calibration interval
Keysight Technologies recommends a one-year calibration cycle for the E36731A battery emulator.
Keysight E36731A User's Guide
Standard Shipped Items and verify that you have received these items with your
27