Keysight E36731A Manuel D'instructions page 21

Item
6 Interface status
: The instrument is connected to USB.
: The instrument is connected to LAN.
(blinking): The instrument is under identification mode via
remote interface.
: The instrument is not connected to LAN.
(blinking): The LAN connection is at fault.
7 Slew rate
Displays the rising slew and falling slew rate
8 Input delay
Displays the Over-protection delay and Input On/Off delay status/values.
9 Soft front panel menu
10 Input settings
Displays the present input value settings in voltage, ampere, ohms and watts. Use the numeric keypad or turn the front panel knob to
adjust these settings.
11 Input short indicator
Displays when input short is enabled.
12 Input meters
Displays the actual input voltage. current and power.
Keysight E36731A User's Guide
Description
LIST1: Sequencer (List mode) is running.
CONT1: Sequencer (Continuous mode) is
running.
PULS1: Sequencer (Pulse mode) is running.
TOGG1: Sequencer (Toggle mode) is running.
!ERR: An error has occurred (press Utilities >
Error to view the Error Log).
21