ARGENTO E-Bike Piuma Mode D'emploi page 9

CAUTION
How to use
The electrically power assisted cycle is a bicycle fitted with an auxiliary electric motor that is
activated only when the pedals are turned.
The motor does not, therefore, replace the work performed by your leg muscles, but assists
them so they work less hard by enabling the electrical and electronic components supplied
with the product, i.e. the battery, handlebar controls, sensors and control electronics (control
unit).
More specifically, the electric motor is powered by a battery and operated by a unit that
controls the delivery of power and additional thrust provided to assist the effort made by
the rider's muscles when pedalling based on the real-time reading of values detected by
a series of pedal-assist sensors (PAS). These sensors are positioned on the outside of the
frame or inside the components and are based on the control parameters entered by the
user via the handlebar controls (display).
In accordance with the provisions of European Directive 2002/24/EC, the electric motor
supplied with the electrically power assisted cycle, is only activated to assist the user when
pedalling and will be disabled upon reaching a speed of 25 km/h.
The electrically power assisted cycle has been designed and manufactured to be ridden
outdoors on public roads and cycling paths, on both tarmacked surfaces and/or ground that
is suitable for the specific technical and structural features of the bike.
Any changes to its construction may compromise the behaviour, safety and stability of the
electrically power assisted cycle and may cause an accident.
Any other types of use, or any extensions of use beyond the one intended, do not
correspond to the intended use attributed by the manufacturer and the latter, therefore,
disclaims all liability for any resulting damage.
The autonomy of the battery supplied with the electrically power assisted cycle and,
therefore, the relevant distance data estimated in km, may vary significantly depending on
the specific mode of use (total load transported, how hard the rider pedals the bike, level of
electric pedal assistance detected, how often the rider departs and restarts), the mechanical
and electrical conditions of the product (tyre pressure and wear, battery efficiency level) and
external influences (slopes and road surface, atmospheric conditions).
Before each use, carefully check that the brakes are working correctly and are not worn;
check the tyre pressure, the wear of the wheels and battery charge status.
Regularly check that the tightness of the various elements secured by bolts. The nuts and
all the other self-tightening parts can become loose so, these components need to be
periodically checked and tightened.
Like all mechanical components, the item is subject to wear and tear. Different materials
and components may react to wear or stress fatigue in a variety of ways. If the useful life
of a component is exceeded, it could break unexpectedly and injure the user. Any cracks,
08