ARGENTO E-Bike Piuma Mode D'emploi page 31

Number of assisted pedalling levels
3 (1-3)
-
-
1
-
-
2
-
-
3
Enabling walk assist mode
Select a walk assist level equal to or greater than 1 and then, press and hold the - button to
enable the walk assist mode which allows you to activate electric motor assistance up to a
speed of 6Km/h.
Disable the function by releasing the - button.
CAUTION
The walk assist mode must be used in compliance with the regulations in force in the
country of use and is only allowed when pushing the electrically power assisted cycle and
walking alongside it holding the handlebar grips firmly with both hands.
DANGER
It is strictly prohibited to enable the walk assist mode when you are sitting on the saddle of
the electrically power assisted cycle to avoid the danger of injury and the risk of damaging
the electrical components of the bike.
Switching the lights ON/OFF
Press the + button for at least 1 second to light up the display screen and switch the front
light and rear light (if applicable) on or of.
Viewing data (AVG - MAX - TRIP - ODO - Time)
Press the M button quickly to view the successive usage data available for the speed (AVG
and MAX), distance travelled (TRIP and ODO) and duration (Time).
AVG - MAX: the data is temporarily displayed in line with the digital speedometer followed
by automatic reset of the data for the instant speed.
TRIP - ODO - Time: the selected data remains permanently displayed until the display is
turned of.
Press the + and - buttons at the same time for 1 second to reset the AVG, MAX, TRIP and
TIME data.
5 (1-5)
1
-
2
-
3
-
4
-
5
30
9 (1-9)
1
2
3
4
5
6
7
8
9