ARGENTO E-Bike Piuma Mode D'emploi page 30

• LCD DISPLAY - APT 500S
Overview of controls and symbols
1. AVG: display of average speed data recorded
during last use (Km/h or MPH)
2. MAX: display of maximum speed data recorded
during the last use (Km/h or MPH)
3. Digital speedometer: indicator light for speed
detected during use (Km/H or MPH)
4. Indicator light for lights ON
5. Indicator light for instant motor deactivation
by brake lever operation with cut-of sensor
supplied (if included)
6. Indicator light for residual battery charge
7. Indicator light for the assisted pedalling level
selected (number) or indicator light for walk
assist mode ON (P)
Function description
Display ON/OFF
Press the ON/OFF button for at least 1 second to switch the display on or of.
Selecting the assisted pedalling level
Press + or - button to increase or decrease the level of selected assisted pedalling.
The display is pre-configured to ofer the user 5 different assisted pedalling levels (variable
values from 1 to 5).
Assistance level 1 provides minimum electrical assistance from the motor.
Assistance level 5 provides maximum electrical support from the motor.
If you select level 0, you exclude electrical assistance from the motor.
When configuring the display, you can modify the parameter for the interval of assisted
pedalling that can be selected: 0-3, 0-5 and 0-9.
These options do not change the minimum and maximum value of electrical assistance
provided by the motor, but only allow a different distribution of the pedalling assistance
levels between the minimum and maximum value as described in the table below:
8. Indicator light for walk assist mode ON
corresponding to a value of 1 or above
9. Malfunction warning light
10. Time: display of overall usage time
(Hours:Minutes)
11. ODO: display of total distance travelled (Km or
Miles)
12. TRIP: display of partial distance travelled (Km or
Miles)
13. Button to vary and/or decrease value (-)
14. Button to vary and/or increase value (+)
15. M: mode button (MODE)
16. ON/OFF button
29