Publicité
Les langues disponibles
Les langues disponibles
Indicator light for residual battery charge
The battery charge level is shown on the display screen as a number of dashes between 0
and 5.
If there are 5 dashes, it means that the battery is charged to the maximum percentage
defined and detected instantly.
Less dashes are shown to indicate a decrease in the battery charge level available and
subsequent autonomy.
The level of the battery charging indicator may fluctuate depending on how the electrically
power assisted cycle is being used, for example, when going up a slope, the level displayed
can drop rapidly as there is a much higher battery consumption.
The individual dashes indicate the specific battery charge range detected at the time and do
not necessarily indicated a percentage of the residual autonomy.
Malfunction indicator light
If a malfunction of the bike's electrical and/or electronic system is detected, the relevant
warning light will appear on the display screen and the relevant identification Error Code will
be displayed at the same time.
Error Code
2
3
4
7
8
10
11
17
18
19
20
Parameter configuration
Press the M button for at least 3 seconds to access the configuration menu and then,
quickly press the M button to confirm the data entered and display the next parameter to be
configured.
Select the value for the individual parameter by pressing the + or - buttons and confirming it
by pressing the M button (quickly to access the next parameter).
The sequence of parameters that can be configured is shown below:
Malfunction description
Malfunction when using the walk assist mode lever
Brake sensor malfunction
Control unit malfunction
Control unit overheated
High voltage protection (voltage above threshold)
Motor malfunction (excessive power consumption)
Motor hall sensor malfunction
Display-control unit wiring communication malfunction
Display-control unit programming communication malfunction
Brake sensor malfunction
Motor block
27
Publicité
