ARGENTO E-Bike Piuma Mode D'emploi page 17

Handlebar stem plate assembly/disassembly instructions for handlebar installation/
removal (if necessary - optional)
Remove the handlebar stem from the top end of the handlebar attachment as follows:
remove the screw 1 and then, the lever 2.
Then, remove the metal plate 3 and lastly,
remove the metal plate 4 by sliding it
sideways.
Installing and positioning the seat post
Insert the seat post into the seat tube of
the frame and, after positioning the saddle
correctly, secure the seat post firmly using
the special clamping device (seat post
clamp) on the frame.
Now put the previously removed handlebar
stem back in place, following the steps in
reverse order.
Make sure to tighten properly to avoid
dangerous situations while riding.
16