Publicité
Les langues disponibles
Les langues disponibles
Select a patient from the Order List
Entering Patient Information Manually
To manually enter the patient information, follow the steps below:
1.
Click the patient information area in the main screen to open the
patient information screen. Or click [File] → [Patient Info] to enter
the patient information screen.
2.
Enter patient information in the patient information screen.
3.
Click the [OK] button to save the patient information.
4.
Click the [Reset] button to clear and re-enter the patient information.
5.
Click the [Cancel] button to exit without saving the patient
information.
Note
You can save patient information only when all the required patient information
is entered.
Reading Patient ID with the Device's Camera
To read the patient ID with the built-in camera of the device, follow the
steps below:
1.
Click the [
2.
Use the device's camera to scan the linear barcode or QR code, and
enter the decoded content into the patient ID text box.
3.
Enter other patient information manually.
4.
Click the [OK] button to save the patient information.
Reading Patient ID with a Barcode Reader
To read the patient ID with the barcode reader, follow the steps below:
1.
Connect the barcode reader to the USB connector of the device.
2.
Press down the button on the reader handle, and target the reader to
the barcode. Then the [Patient Info] menu pops up with the patient
ID entered.
Warning
After scanning, please check the scanning result to ensure that the correct
patient information is entered.
Selecting a Patient from the Order List
To select a patient from the order list, follow the steps below:
] button to start scanning.
11-2
Publicité
