Publicité
Les langues disponibles
Les langues disponibles
Print ECG reports through an external printer or an external thermal
recorder.
Export patient data to USB flash disk via USB connector.
Support the user login permission control, use password or account
& password authentication to use the device.
Support local login and AI Server login to the device, and view the
historical patient data of the department according to the login
account.
In case of emergency, support rapid ECG examination without logging
in.
13.7 Operating Modes
13.7.1 Routine Use
When the device is turned on, it automatically enters the routine use
mode, which is most frequently used clinical mode. In this mode, you can
perform ECG measurement, record waveforms, measured values and
analysis results, set up the system, print ECG reports and export ECG data.
In the auto diagnosis mode, click the exit icon in the upper right corner of
the screen to exit the current mode and return to the login screen.
In AI diagnosis mode, click the user icon in the upper right corner of the
screen to view the current user name, click [Logout] button to exit the
current account and return to the login screen.
13.7.2 Emergency Use
In case of emergency, click the [Emergency] button to enter the
emergency use mode. This mode only displays the acquisition screen. You
can collect, display, obtain and print measured values (no diagnosis
results).
After entering the emergency mode, both the waveform area of the
acquisition screen and the information area at the bottom left of the
printed report display the word "Emergency".
Click the [Exit] button in the upper right corner of the screen to exit the
emergency mode and return to the login screen.
11-15
Publicité
