Publicité
Les langues disponibles
Les langues disponibles
Attaching Limb Electrodes
Electrode
Reed
To attach lime electrodes, follow the steps below:
1.
Check the electrodes and ensure that they are clean.
2.
When the patient's skin is ready, daub a thin layer of conductive
paste evenly to the electrode area on the limb.
3.
Daub a thin layer of conductive paste on the metal part of the limb
electrode clamp.
4.
Connect the electrode to the limb, and make sure that the metal part
is placed on the electrode area above the ankle or the wrist.
5.
Attach all limb electrodes in the same way.
Attaching Chest and Back Electrodes
Suction bulb
Metal cup
To attach the chest and back electrodes, follow the steps below:
1.
Check the electrodes and ensure that they are clean.
2.
When the patient's skin is ready, daub a thin layer of conductive
paste evenly to the electrode area on the chest / back.
3.
Daub a thin layer of conductive paste on the brim of the metal cup of
the electrode.
4.
Place the electrode on the chest electrode site and squeeze the
suction bulb, and then release it until the electrode is firmly attached
to the corresponding part.
5.
Attach all chest electrodes in the same way.
11-11
Clamp
Electrode
Publicité
