Operating And Control Elements - AEBI TP48 Mode D'emploi

Operating and control elements

Driving
PTO shaft
Instrument panel
Working hydraulics
Driver's seat
Heating
72
1 Ignition lock with key
2 Accelerator pedal
3 Throttle hand lever
4 Steering wheel
5 Turn signals, high-beam light, headlight flasher and horn stem
6 Clutch pedal
7 Brake pedal
8 Hand-brake (parking brake with locking)
9 Drive-direction lever
10 Gear-change lever
11 Rear differential lock
12 Inter-axle differential lock
13 Front differential lock
19 Change lever L – H (low / high)
14 PTO shaft clutch
15 Rear PTO shaft shift lever
16 On-board computer
21 Engine oil pressure inadequate
22 Air filter blocked
23 Inadequate charging current
24 Brake fluid level too low, insufficient brake pressure, hand-brake on
25 High-beam light on
26 Rear lighting (7-way socket) not connected; reverse gear engaged
27a Direction signal on
27b Trailer direction signal
28 Pre-heat system in operation
29a Select inter-axle differential lock (yellow)
29b Actual setting inter-axle differential lock (green)
30 Parking lights / Headlight low
31 Windscreen wash / wipe
32 Heater fan (option)
33 Overhead supplementary lighting (option)
34 Rotating light (option)
35 Hazard warning lights
36 Single–acting valve to rear with float function (single shaft)
37 Double–acting valve to rear with float function (twin shaft)
38 Double–acting valve to rear (twin shaft)
39 Flow control valve.
50 Weight adjustment:
51 Fore-aft adjustment
52 Backrest angle adjustment:
53 Safety belt
56 Heater valve