Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Hydraulic system
Draw hitch
Fuel tank
Weights
Chassis N°,
Engine serial N°,
Manufacturer plate,
Dimensions
Pressure 175 bar. Feed rate 25 l/min at engine speed of 2,400 rpm.
Monoblock with 3 sliding valves (1× single acting with float function, 2x double acting, one of
which with float function). Flow control distributor.
Option: 4 plug-in connectors to the front.
Front Ø 30 mm, 650 mm above the ground.
Rear Ø 25 mm, 420 mm above the ground.
Capacity 65 litres.
Unladen weight (depending on accessories)
Permissible gross weight
Permissible front-axle load
Permissible rear-axle load
Minimal axle loads:
Front axle
Rear axle
Permissible trailer weight, with overrunning brake
Permissible trailer weight, with continuous brake
Permissible trailer weight, unbraked
1278
Bereifung / Pneus /
Pneumatici / Tyres:
15.0/55-17
* 10.0/75-15.3
2750 (3150)
Farbrikationsschild
Plaque de fabrication
Piastra di fabbricazione
Manufacturer plate
Fahrwerk-Nr.
Chassis no.
Numero dell'autotelaio
Chassis no.
Motor-Nr.
Numéro du moteur
Numero del motore
Engine serial no.
4567 (4967)
2,100 – 2,750 kg
6,000 kg
2,600 kg
3,700 kg
550 kg
35% actual working load
3,500 kg
6,000 kg
1,300 kg
71
Publicité
Table des Matières
