Publicité
Les langues disponibles
Les langues disponibles
The Statistic menu
Description
Totl Run-Time
Runs-OK
Runs aborted
Ignitions OK
Ignitions FAILED
Starts FAILED
Total fuel count
LoBatt Cut-Outs
All the parameters in this menu are displayed for information only, and cannot be changed by
the operator.
The Test Functions menu
Description
Pump TestVolt
GlowPlug Power
GasValve Test
SmokerValve Test
FuelValve Test
Temp.
AD
Explanation
Total turbine running time (ignition -> shut down).
Number of turbine runs which were concluded without errors.
Number of turbine runs which were terminated by the Jet-tronic safety
system.
Number of successful attempts at ignition.
Number of failed attempts at ignition.
Number of failed starts.
Total fuel consumption by the turbine.
Number of shut downs due to insufficient battery voltage.
Explanation
Fuel pump test. While the „Change Value/Item" key ist pressed the
indicated voltage is switched to the pump; it can be increased or
decreased by the (+/-) keys.
Caution: Disconnect the fuel line from the turbine before operating the
pump manually!
Indicate or adjust the glow plug voltage.
Default=2.1V for OS A3 glow plug.
Test (open) the propane shut off valve by „Change Value/Item" key
Test (open) the smoker valve by „Change Value/Item" key
Test (open) the fuel shut off valve by „Change Value/Item" key
left: actual exhaust gas temperatur (EGT)
Helicopter mechanics
with model turbine engine
right: intake temperatur
64
Publicité
