Storing The Appliance - Russell Hobbs RHCP 021 Mode D'emploi

CLEANING
To keep your Biscuit/Cookie Maker operating properly, we recommend cleaning after each
recipe.
1. Unplug the Biscuit/Cookie Maker.
2. Hold the Tube pointing down with one hand and turn the Tube Cover counter
clockwise. This will unlock the Tube Cover and the Biscuit/Cookie Disc or Tip.
Remove the Disc or Tip Assembly and set all parts aside.
3. Hold the Handle of the Motor Body with one hand. With the other hand, turn the Tube
counter clockwise until the Tube is free from the Motor Body.
4. Remove the Tube from the Motor Body. Pull the Cam Shaft with Press Disc out of the
Motor Body. Rinse and dry thoroughly.
CAUTION: Avoid any contact of any liquid with the inside of Motor Body.
5. Remove the Cam Disc from the Motor Body. Using the two Grips on the Cam Disc,
firmly turn the Disc counter clockwise until the Disc lifts out easily.
6. Clean the Cam Disc with soapy water, rinse and dry thoroughly.
7. Wash the Biscuit/Cookie Discs, Filler Tips, Filler Tip/Decorator Tip Adapter,
Decorator Tips, Cannoli Shell Forms, Tube Cover, Tube Cam Disc, press Disc and
Cam Shaft immediately after each use in warm soapy water. Rinse and dry
thoroughly.
DO NOT WAS IN THE DISHWASHER
8. The Filler/Decorator Tip and Biscuit/Cookie Discs are made of Stainless Steel and
should be cleaned with a soft cloth or sponge. Dry immediately after cleaning to
avoid spotting. Do not put Discs or Tips into dishwasher, as they will discolour.
9. Wipe the exterior of the Motor Body with a soft, damp cloth. Dry thoroughly.
10. Do not use steel wool, scouring pads or abrasive cleansers as they will damage the
finish.
11. As the Filler/Decorator Tip and Biscuit/Cookie Discs get older, they may darken in
colour. This is normal and in no way interferes with the use of thE product.
12. A stiff brush will aid in cleaning the inside Tube and Filler/Decorator Tip.
13.

STORING THE APPLIANCE

1. Clean the Biscuit/Cookie Maker as instructed above.
2. When the unit is not in use, be sure to leave it unplugged.
3. Store the Biscuit/Cookie Maker and all parts in the Storage Box in a clean, dry
location.