Product Information - salmson SIE Serie Installation Et Mise En Service

5

Product information

5.1 Type key
Installation and operating instructions SIE, DIE, PBE
The type key consists of the following elements:
Example: SIE 208-13/5.5-xx
DIE 208-13/5.5-xx
S Flange-end pump as Single pump
D Flange-end pump as Double pump
IE In-line pump with Electronic module for electronic
speed control
2 Number of poles, motor
08 Nominal diameter DN of the flange connection [cm]
Impeller diameter [cm]
13
5.5 Rated power P
xx Variant: e.g. R1 – without differential pressure
sensor
Example: PBE 65-140/5.5/2/13-xx
P Flange-end pump as MonoBloc pump
BE MonoBloc pump with Electronic module for elec-
tronic speed control
65 Nominal diameter DN of the flange connection
(pressure side) [mm]
Maximum impeller diameter of the pump family
140
[mm]
5.5 Rated power P
2 Number of poles, motor
Impeller diameter [cm]
13
xx Variant: e.g. R1 – without differential pressure
sensor
[kW]
2
[kW]
2
English
69