salmson SIE Serie Installation Et Mise En Service page 99

8 Operation
8.1 Controls
The white button
Fig. 28: The white button
DIP switch
ON
1 2 3 4
Fig. 29: DIP switch
Installation and operating instructions SIE, DIE, PBE
The electronics module is operated using the following operating
elements:
The white button (Fig. 28) can be turned to select menu elements and
used to change values. Pressing the white button activates a selected
menu element and confirms values.
The DIP switches (Fig. 9, Item 6/Fig. 29) are located under the housing
cover.
• Switch 1 is for switching between the standard and service mode.
For additional information, see chapter 8.6.6 "Activating/deactivating
service mode" on page 98.
• Switch 2 allows activations or deactivation of the access disable feature.
For additional information, see chapter 8.6.7 "Activating/deactivating
access disable" on page 98.
• Switches 3 and 4 permit termination of the multi-pump communication.
For additional information, see chapter 8.6.8 "Activating/deactivating
termination" on page 99.
English
91