Intended Use; Product Information; Type Key - salmson Alti-Nexis V Serie Manuel D'installation Et Mise En Service

4 Intended use

Salmson pressure boosting systems of the Alti-
Nexis series are designed for pressure boosting
and pressure support in water-supply systems.
They are used in:
• drinking water supply systems, primarily in high-
rise apartments, hospitals, offices and industrial
buildings, the structure, function and require-
ments of which comply with the following stand-
ards, guidelines and directives:
• DIN1988 (for Germany)
• DIN2000 (for Germany)
• EU Directive 98/83/EC
• Drinking Water Ordinance - TrinkwV2001 (for
Germany)
• Industrial water supply and cooling systems
• Fire water and supply systems for local use,
• Irrigation and sprinkling installations
Automatically controlled pressure boosting sys-
tems are supplied from the public drinking water
mains either directly (connected directly) or indi-
rectly (connected indirectly) using a break tank.
These break tanks are sealed but are not pressu-
rised, i.e. they are under only atmospheric pres-
sure.
Installation and operating instructions Alti-Nexis V/-Nexis VE/-Nexis advens

5 Product information

5.1 Type key

Example: Salmson-Alti-Nexis V605-2-SC-16-T4
Salmson Brand name
Alti Product family: pressure boosting systems
Nexis Series designation of pumps (see enclosed
pump documentation)
V Pump design, vertical standard version
6 Nominal flow rate Q
3
[m /h] (2-pole version 50 Hz)
05 Number of pump stages
2 Number of pumps
SC Series designation control unit Smart Control
16 Max. operating pressure [bar]
T4 Mains connection, three-phase
Exemple : Salmson-Alti-Nexis V1007-3-SC-16-T4-FC
Salmson Brand name
Alti Product family: pressure boosting systems
Nexis Series designation of pumps (see enclosed
pump documentation)
V Pump design, vertical standard version
10 Nominal flow rate Q
3
[m /h] (2-pole version 50 Hz)
07 Number of pump stages
3 Number of pumps
SC Series designation control unit Smart Control
16 Max. operating pressure [bar]
T4 Mains connection, three-phase
FC Frequency Converter integrated in the control
unit
Exemple : Salmson-Alti-Nexis VE1603-4-SC-16-T4
Salmson Brand name
Alti Product family: pressure boosting systems
Nexis Series designation of pumps (see enclosed
pump documentation)
VE Pump design, vertical standard version
16 Nominal flow rate Q
3
[m /h] (2-pole version 50 Hz)
03 Number of pump stages
4 Number of pumps
SC Series designation control unit Smart Control
16 Max. operating pressure [bar]
T4 Mains connection, three-phase
English
33