Special Safety Instructions; Safety Signs - Phoenix Mecano M9 Notice D'assemblage

5.2 Special safety instructions

•
All work with the electric cylinder may only be carried out in accordance with these
instructions.
•
The device may only be opened by authorized specialist personnel. If there is a fault in the
electric cylinder, we recommend contacting the manufacturer and/or sending the electric
cylinder to be repaired.
•
Before installation, removal work, maintenance or troubleshooting, disconnect the power
source.
•
The correct routing of supply lines prevents this application from being a risk.
•
Use original accessories and spare parts only.
•
Possible damage from failure of the limit switch or from a nut breaking must be prevented in
a constructive manner.
•
No lateral forces or torques may affect the push rod or electric cylinder.
•
With tensile loading, constructional measures must be net to prevent the push rod from
releasing from the spindle.
•
Unauthorised modifications or changes to the electric cylinder are not permitted for safety
reasons.
•
The performance specifications of these electric cylinder specified by
Phoenix Mecano Komponenten AG must not be exceeded.
•
The type plate must remain legible. It must be possible to identify the ratings data effortlessly
at any time.
•
Safety-relevant hazard symbols identify danger areas on the product.
•
Safety-relevant devices must be inspected at regular intervals, but at least once a year, for
proper function, damage and completeness.
•
With an overhead installation of the electric cylinder, fixed loads must be secured against
falling down. The danger area underneath the application must be marked in the
documentation of the end product.
•
If a mains lead and/or feed line is damaged, the electric cylinder is to be taken out of service
immediately.

5.3 Safety signs

The warning and mandatory signs are safety signs that warn of risk or danger.
Information in these assembly instructions on particular hazards or situations on the electric
cylinder must be observed, as failure to do so increases the risk of accidents.
The "General mandatory sign" instructs you to be alert.
Marked information in these assembly instructions requires your particular attention.
They contain important information about functions, settings and procedures. Failure
to observe may lead to personal injury and malfunctions to the electric cylinder or
damage to the environment.
5. Safety
39