Safety; Safety Instructions; Special Safety Instructions - Phoenix Mecano RK Rose+Krieger LZ60 S/P Notice D'assemblage

5.1 Safety instructions

RK Rose+Krieger GmbH has built this electric cylinder according to the current state of
technology and the existing safety regulations. Nonetheless, this electric cylinder can pose risks to
persons and property if it is used improperly or for a non-intended use or if the safety instructions
are not observed.
Correct operation guarantees high performance and availability of this electric cylinder. Faults or
conditions which can impair safety are to be rectified immediately.
Every person who is involved in the assembly, use or operation of this electric cylinder must have
read and understood these assembly instructions.
This includes
•
understanding the safety instructions in the text and
•
being familiar with the arrangement and function of the various operating and application
options.
Only nominated persons may use, install and operate the electric cylinder. All work on and with
the electric cylinder may only be carried out in accordance with these instructions. For this reason,
these instructions must always be kept in a location near the electric cylinder and stored safely.
The general, national and company safety regulations must be observed. Responsibilities for the
use, assembly and operation of this electric cylinder must be clearly stipulated and observed so
that no unclear situations can arise with regards to safety aspects. The operator must always
ensure that no person or object remains in the danger area around the electric cylinder before
putting into operation. The user must only use the electric cylinder if it is in perfect condition. Any
change is to be reported to the nearest line manager immediately.

5.2 Special safety instructions

•
All work with the electric cylinder may only be carried out in accordance with these
instructions.
•
The device may only be opened by authorized specialist personnel. If there is a fault in the
electric cylinder, we recommend contacting the manufacturer and/or sending the electric
cylinder to be repaired.
•
Unauthorised modifications or changes to the electric cylinder are not permitted for safety
reasons.
•
The performance specifications of these electric cylinders specified by RK Rose+Krieger GmbH
may not be exceeded (see Chapter 6.2).
•
The type plate must remain legible. It must be possible to identify the ratings data effortlessly
at any time.
•
Safety-relevant hazard symbols identify danger areas on the product.
Safety-relevant devices must be inspected at regular intervals, but at least once a year, for proper
function, damage and completeness.

5. Safety

41