Product Information; Mode Of Operation; Dimensions - Phoenix Mecano M9 Notice D'assemblage

6. Product information

6.1 Mode of operation

The electric cylinder is to be used exclusively for the adjustment of guided components or other
adjustment tasks of a similar nature. The drive is carried out using the integrated DC motor.
6.2 Electric cylinder assembly M9

6.2.1 Dimensions

Condensed water opening
The plastic joint head is screwed onto the M8 thread of the push rod.
The plastic joint head can be pulled out by approx. 1 mm to 1.5 mm to extend the fitting length.
Use Loctite 496 adhesive for securing the screw connections.
Observe the details of the manufacturer for the application of the adhesive used.
40