Phoenix Mecano M9 Notice D'assemblage page 33

1.1 Declaration of incorporation BGR. M9 / 010 / 015
As set out in Machinery Directive 2006/42/EC, Annex II, 1.B for partly completed machinery
The manufacturer
Phoenix Mecano Komponenten AG
Hofwisenstrasse 6
CH-8260 Stein am Rhein
confirms that the named product
Product/manufacture:
Project number:
Trade name:
Function:
complies with the requirements for partly completed machinery in accordance with EC Machinery
Directive 2006/42/EG.
The following basic requirements of Machinery Directive 2006/42/EC are fulfilled:
1.1.5, 1.3.2, 1.3.3, 1.3.7, 1.3.8, 1.3.9, 1.5.1, 4.1.2.3, 1.3.4
Moreover, we declare that the special technical documents have been created according to
Appendix VII Part B.
The manufacturer declares explicitly that the partially completed machinery meets all the relevant
provisions of the following EC directives and ordinances:
2011/65/EC
The person in the community that is authorised to compile the
relevant technical documents:
Michael Amon
RK Rose+Krieger GmbH
Potsdamer Str. 9
DE - 32425 Minden
Authorised representative:
RK Rose+Krieger GmbH
Potsdamer Str. 9
DE - 32425 Minden
M9, M10, LH10, LH11, LH950, LH15
See type plate label
E-cylinder M9, M10, LH10, LH11, LH950, LH15
Extending and retracting the push rod by electromotive power to create a
linear movement
Directive 2011/65/EC of the European Parliament and of the Council from
June 8th, 2011 on the restriction of the use of certain hazardous
substances in electrical and electronic equipment. June 2011 on the
restriction of the use of certain hazardous substances in electrical and
electronic equipment
Published in L 174/88 from 01/07/2011
1. Declaration of incorporation
33