Connecting The Ac Power Cord - NSK NLZ E Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3-5

Connecting the AC Power Cord

Insert the AC power cord into the inlet of the AC
1
adapter.
During this procedure the power switch of the main unit should remain OFF.
The AC power cord included with the product has the length of 2 meters. Bundle and fix the extra cord to prevent
the operator or the patient from inadvertently stepping on it.
Use only the AC adapter, AC power cord provided with the product. Never use other AC adapters. Doing so might
cause a malfunction.
When disconnecting the AC power cord, motor cord or other cords, hold the cords by their plug and pull the plug
out. Holding and pulling the cord might snap the wiring in the cord and cause a malfunction.
3-6
Connecting / disconnecting the motor and motor Cord
<Connecting>
Align and insert the pins of the connector carefully and
firmly into the pin holes of the motor, and fasten the
motor nut securely.
Pin
Motor
Motor Cord Connector
CAUTION
Hole
Tighten
Loosen
Motor Cord Nut
15
Insert the AC power cord plug to commercial
2
power supply outlet.
<Disconnecting>
Unscrew and detach the motor cord nut, and gently
pull out the motor cord.
Preparations for Use

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Nlz

Table des Matières