Preparations for Use
In the setup mode, the function item can be
4
selected using the Speed Key (+/-) ( 1 ), and
the value can be changed using the Torque Key
(+/-)* ( 2 ).
* The Setting Key (+/-) in case of NLZ
4- 1
Change the settings by pressing the Torque Key
6
(+/-). * The Setting Key (+/-) in case of NLZ
4- 2
Once a value is changed, the new value will
5
blink. Press the Mode Key quickly to save the
new value. Once saved, this new value will stop
blinking.
18
6
5