NSK NLZ E Mode D'emploi page 35

Operation Procedure
4-6 Last Memory Function
This function memorizes the last settings of each mode just before the power is turned OFF using the
Power key.
When the power is turned back ON, this function retains those settings of each mode.
The settings stored in this memory includes:
In <General Application Mode>
Gear ratio, rotation speed, light intensity, notifying sound volume, and memory number
In <Rotary Endo Mode>
Gear ratio, rotation speed, torque, auto reverse mode, light intensity, notifying sound volume, and
memory number
In <Reciprocating Endo Mode>
Notifying sound volume
4-7 Initializing Program (Restoring the Factory Setting)
This function allows to reset the programs of various settings (gear ratio, rotation speed, torque, auto
reverse mode) stored in the memory to the default factory setting.
By carrying out this function, various functional settings (such as air pressure for motor startup speed) as
described in "3-8 Changing the settings for various functions" will be reset to the default factory setting.
Turn OFF the power of the control unit.
1
While pressing down the Torque Key* (press +/-
2
keys simultaneously) (
Power Key (
key in case of NLZ.
1
34
), press and hold the
1
) to turn ON the power. *Setting
2
2- 1 2- 2