NSK NLZ E Mode D'emploi page 34

4-5 Sound Volume (When the load exceeds the set torque limit value, Error etc.)
Press the Volume key.
1
Volume: High
Volume: Low
Volume: OFF
<List of Notifying Sound>
Rotary Endo Mode
Alarm sound for when the motor or a handpiece is overheating.
When the motor/ handpiece is not functional, meaning the checking result of
the handpiece is "NG (blinking)"
Turning ON the power while pressing the foot pedal of the dental unit
When an error is generated:
Notifying sound will not be generated when the sound volume is set to OFF. Be aware of this while using the
system with the sound volume set to OFF.
Type
When reaching 75% of the torque setting Melody 1
When reverse rotating
CAUTION
33
Operation Procedure
1
Notifying Sound
Melody 2
Melody 3
A set of 3 short beeps continues to
sound.
1 short beep followed by 1 long beep.