NSK NLZ E Mode D'emploi page 18

3-8 Changing the settings for various functions
Settings for various functions can be changed from their default values. This is to make the system easier
to use, when it is used for the first time after purchase. You will need to enter into the setup mode, change
the settings and save the new ones as below:
Turn ON ( I side ) the power switch on the main
1
unit.
3
Hold down the Mode Key* for more than two
seconds. With an alarm sound, "System" and
"Setup" on the LCD display will start blinking and
the system will enter into the setup mode.
* The Setting Mode Key in case of NLZ
Press the Power Key on the control unit.
2
Blinking
17
Preparations for Use
2
3