Introduction - John Bean B 1200P Manuel D'utilisation

10

Introduction

3.0 Introduction
This wheel balancer combines advanced, high-
performance technology, robustness and reliability with
very simple, user-friendly operation.
The low rotation speed of the wheel ensures that this
balancer is very safe.
The colour monitor shows the data set, operating
modes, values measured, symbols and operator help
information. The touch-screen monitor also includes
all Operating Controls.
Operator time and effort are reduced to a minimum,
while maintaining accuracy and reliability.
Always work in a clean area and with clean wheels.
First remove dirt and old weights from tyres and rims.
That way proper mounting of the wheel and an optimal
balancing result can be achieved.
WARNING:
THIS MACHINE HAS A SINGLE OPERATING
STATION (A). THE OPERATOR IS RESPONSIBLE
FOR RESTRICTING ACCESS TO THE WORK
AREA AND FOR ANY CONSEQUENCE ARISING
FROM USING THE EQUIPMENT
THE USE OF THIS DEVICE IS ALLOWED
ONLY TO PERSONNEL DULY TRAINED BY AN
AUTHORIZED DEALER AND IN POSITION (A).
OPERATOR MUST BE NEAR THE MACHINE IN
GOOD WORKING POSITION; CONTROL SIDE
(A).
Application
The off-the-vehicle wheel balancer is designed for
dynamic and static balancing of passenger car and
light-truck wheels, that fall within the limits stated in
the technical specifi cations (
This is a high accuracy measuring device. Handle with care.
3.1 Conditions
During use or long term storage, the conditions should
never exeed:
Temperature range
Humidity range
F
2).
0-50 °C
10-90%
non condensing