Burkert 8136 Mode D'emploi page 61

11 Supplement
10 mm (0.394 in)
2 mm (0.079 in)
0
- 2 mm (- 0.079 in)
- 10 mm (- 0.394 in)
Fig. 43: Deviation under reference conditions - encapsulated antenna system
1 Reference plane
2 Antenna edge
3 Recommended measuring range
10 mm (0.394 in)
2 mm (0.079 in)
0
- 2 mm (- 0.079 in)
- 10 mm (- 0.394 in)
1 2
Fig. 44: Deviation under reference conditions - plastic horn antenna
1 Reference plane
2 Antenna edge
3 Recommended measuring range
Repeatability
Deviation with bulk solids
Variables influencing measurement accuracy
Specifications apply to the digital measured value
Temperature drift - Digital output
Additional deviation through electromag-
netic interference acc. to EN 61326
Specifications apply also to the current output
Temperature drift - Current output
Deviation on the current output through
analogue/digital conversion
Deviation on the current output due to
strong, high frequency electromagnetic
fields acc. to EN 61326
60
0,5 m (1.6 ft)
1 2
0,5 m (1.6 ft)
LEVEL TRANSMITTER 8136 • 4 ... 20 mA/HART - two-wire
≤ ±1 mm
The values depend to a great extent on the application.
Binding specifications are thus not possible.
±3 mm/10 K, max. 10 mm
< ±50 mm
±0.03 %/10 K relating to the 16 mA span max. ±0.3 %
< ±15 µA
< ±150 µA
3
3