Burkert 8136 Mode D'emploi page 10

Storage
Storage and transport
temperature
Display and adjustment
module
Electronics module
LEVEL TRANSMITTER 8136 • 4 ... 20 mA/HART - two-wire
Up to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
Unless otherwise indicated, the packages must be stored only under
the following conditions:
•
Not in the open
•
Dry and dust free
•
Not exposed to corrosive media
•
Protected against solar radiation
•
Avoiding mechanical shock and vibration
•
Storage and transport temperature see chapter "Supplement -
Technical data - Ambient conditions"
•
Relative humidity 20 ... 85 %
3.4 Accessories and replacement parts
The display and adjustment module is used for measured value indi-
cation, adjustment and diagnosis. It can be inserted into the sensor
and removed at any time.
You can find further information in the operating instructions "Display
and adjustment module" (Document-ID 41787).
The electronics module is a replacement part of the LEVEL TRANS-
MITTER series. An own version is available for each type of signal
output.
You can find further information in the operating instructions "Elec-
tronics module LEVEL TRANSMITTER 813X" (Document-ID 41786).
3 Product description
9