Publicité
Les langues disponibles
Les langues disponibles
LEVEL TRANSMITTER 8136 • 4 ... 20 mA/HART - two-wire
ing in this way is not possible - the mounting type must be specified
with the order.
You can find drawings of these mounting options in chapter "Dimen-
sions".
Fig. 2: Flange mounting of the radar sensor
4.3
Mounting preparations, mounting strap
The mounting strap enables simple mounting on the vessel wall or
silo top. It is suitable for wall, ceiling or boom mounting. Especially in
open vessels this is a very easy and effective way to align the sensor
to the bulk solid surface.
The strap is supplied unassembled and must be screwed to the
sensor before setup with three hexagon socket screws M5 x 10 and
spring washers. Max. torque, see chapter "Technical data". Required
tools: Allen wrench size 4.
There are two ways to screw the strap onto the sensor. Depending
on the selected version, the sensors can be swivelled in the strap as
follows:
•
Single chamber housing
– Angle of inclination 180°, infinitely variable
– Angle of inclination in three steps 0°, 90° and 180°
•
Double chamber housing
– Angle of inclination 90°, infinitely variable
– Angle of inclination in two steps 0° and 90°
4 Mounting
11
Publicité
