Burkert 8136 Mode D'emploi page 45

6 Set up with the display and adjustment module
44
Menu Menu item
Display Language
Displayed value
Display unit
Scaling size
Scaling
Backlight
Additional adjust- Distance unit
ments
Temperature unit
Probe length
Linearisation
curve
HART mode
6.4 Saving the parameter adjustment data
We recommended noting the adjusted data, e.g. in this operating
instructions manual, and archiving them afterwards. They are thus
available for multiple use or service purposes.
If the instrument is equipped with a display and adjustment module,
the data in the sensor can be saved in the display and adjustment
module. The procedure is described in the operating instructions
manual "Display and adjustment module" in the menu item "Copy
sensor data". The data remain there permanently even if the sensor
power supply fails.
The following data or settings for adjustment of the display and ad-
justment module are saved:
•
All data of the menu "Setup" and "Display"
•
In the menu "Additional adjustments" the items "Sensor-specific
units, temperature unit and linearization"
•
The values of the user programmable linearization curve
The function can also be used to transfer settings from one instru-
ment to another instrument of the same type. If it is necessary to
exchange a sensor, the display and adjustment module is inserted
into the replacement instrument and the data are likewise written into
the sensor via the menu item "Copy sensor data".
LEVEL TRANSMITTER 8136 • 4 ... 20 mA/HART - two-wire
Default value
Like order
Distance
m
Volume
l
0.00 lin %, 0 l
100.00 lin %, 100 l
Switched off
m
°C
Length of the standpipe Ex factory
Linear
Standard
Address 0