Programming The "Full" Ramp Rate - Rohde ST 630 Mode D'emploi

6.5.4. Programming the "FULL" ramp rate

An unregulated full load heating/cooling ramp ("FULL") can be programmed.
Display
Pr. 1
150°C/HR
FULL
h g
*The keys or can also be held down for faster input.
Meaning Description
Program Select the firing program that is to be
number changed.
Indicator in Select the segment with the heating
the segment ramp to be changed into a cooling
display ramp.
Heating ramp
The ramp rate for the heating or
cooling ramp is shown in the main
Cooling ramp
display.
Heating ramp
Press or hold down the
"FULL" appears in the main display.
Cooling ramp
d
key until
66 / 317 - EN -
Remark
See Section 6.5.1.
See Section 6.5.1.
Possible main display:
„0,1 °C/h-9,9 °C/h",
„10 °C/h-999 °C/h"
• "FULL" heats or cools as fast as
possible.
• The "FULL" value is one step
above the ramp rate "999°C/h".