Saving On Usb Flash Drive; Wi-Fi Module; General Description; Functions Possible With Wi-Fi - Rohde ST 630 Mode D'emploi

10.1.10. Saving on USB flash drive

The control system does not overwrite any files that have already been created on the inserted USB flash drive. It is
recommended that you regularly move files that have already been generated from the USB flash drive to a computer,
to save the files for evaluation and not to exceed the storage capacity of the flash drive.

10.2. Wi-Fi module

10.2.1.

General description

The control unit can be connected to a wireless network (Wi-Fi).
10.2.2.

Functions possible with Wi-Fi

Various functions between the control system (kiln) and a computer, tablet or smartphone can be carried out using
a Wi-Fi connection. The Wi-Fi connection is mainly used with ROHDE app myKiln (see Section 10.4.).
Possible function:
• Measured values recorded by the controller can be sent wirelessly to a computer, tablet or smartphone for
evaluation.
• The kiln operation can be observed and monitored in real-time from a computer, tablet or smartphone (ROHDE
app myKiln).
• Firing program data can be loaded onto the controller using ROHDE app myKiln.
10.2.3.

"Data transmission" indicator

Display Description
The "Data transmission" indicator light flashes when information is being sent over the wireless
network.
10.2.4.

Establishing a connection via a Wi-Fi router (WPS function)

Connecting the control unit to a wireless network (Wi-Fi):
Step Description of the process
1 Switch the control unit off.
d
Press the key and switch on the control
2
unit.
Hold down the
3
appears in the main display.
d
4
Release the
5 Press the WPS key on the wireless router.
After a few seconds, "PAIR" disappears from
6 the main display and the control unit shows
normal information in the main display.
The control system is now permanently
7
connected to the wireless network (Wi-Fi).
Connecting the computer, tablet or
8
smartphone to the Wi-Fi.
"PAIRING"
d
key until
key.
Remark
Press and hold the
The control unit is ready to connect to a wireless network
(Wi-Fi).
Information on the WPS key on the wireless router can
be found in the router's instruction manual and generally
on the Internet.
If this procedure was unsuccessful, repeat the steps
starting with step 1 or try the connecting as described in
section 10.2.4.
Available networks can be searched for on the computer,
tablet or smartphone in the system settings.
80 / 317 - EN -
d
button while switching on.