Declaration Of Conformity - Rohde ST 630 Mode D'emploi

17. Declaration of Conformity

We declare that the relevant and basic requirements of the Low Voltage Directive 2014/35/EU have been met.
Manufacturer:
Community resident authorised
to compile the relevant technical
documentation:
This declaration of conformity of the product described below is issued under the sole responsibility of the
manufacturer.
Description and identification
Product:
Model:
Purpose:
We also declare that the special technical documents were created.
The protection goals of the following additional EU directives have been met:
2014/30/EU
2012/19/EU
The following harmonised standards were used, among others:
EN 61010-1:2020-03
EN 60204-1:2019-06
EN 60335-1:2012-10
The technical documentation can be sent to a national authority following a justified request.
Prutting, July 15th, 2022
(Place and date)
Helmut ROHDE GmbH
Ried 9
83134 Prutting
Germany
Helmut ROHDE GmbH
Stefan Meier
Ried 9
83134 Prutting
Germany
Control unit
ST 630/ST 632
Control of kilns for household, commercial and light industrial use
Electromagnetic Compatibility Directive
Waste Electrical and Electronic Equipment Directive
Safety regulations for electrical measuring, control, regulating
and laboratory devices, Part 1: General requirements
Safety of machinery, Electrical equipment of machines,
Part 1: General requirements
Household and similar electrical appliances, Safety,
Part 1: General requirements
90 / 317 - EN -
Benjamin Rohde (General Manager)
(Signature)