Further Functions - Schenck Process DISOMAT Opus Instructions De Service

English

2.4.6.3 Further Functions

Set to zero with ZeroSet key'
Zero settings can be effected only if scale is unloaded ( -1%...+3% of rated capacity).
Files
The data acquired by ZEUS are internally stored fail-safe in files.
The First Weighings File contains the data of all vehicles in plant (maximum 40)
expected for second weighing.
The Fixed Tare File contains the data of all vehicles (maximum 25) of your car pool or
of regular customers.
The Materials File contains all materials to be accumulated. This function facilitates
material indication in case of weighings where the 25 possible inputs in materials file
can be called up via material number.
Your commissioning engineer will explain to you how to access and edit these files, if
you desire so. You can select:
•
Show data
•
Clear data
•
Print file
In Fixed Tare file you can additionally
•
Create data
as described at Weighing Using Fixed Tare Weight item.
In materials file, you can additionally
•
Create data
i.e. assign numbers 1...25 to material name, and
•
Clear mat. totals
i.e. process cumulative totals.
You can also select
•
Text prompt
to replace prompt
MAT. :
by any prompt text of your choice.
For data processing functions, see menu item 58 "FILES". No password is required.
®
DISOMAT Opus – Operating Instructions
© Schenck Process GmbH, Darmstadt
to set scale to zero.
Scale Specific Control
0630 BV-H2322 AA
- 63 -