Schenck Process DISOMAT Opus Instructions De Service page 62

English
Release Weighing Operation
System prompts for release of weighing operation.
Select using arrow keys.
Contin: Weigh
Contin: Abort
Contin: Weight
Acknowledge selection.
After
Contin: Weigh
ZEUS starts printing (remember to put new weigh slip into printer), returns to home
position and is ready to start next weighing operation.
After
Contin: Abort
all data entered are delected. ZEUS returns to home position and is ready to start next
weighing operation.
After
Contin: Weight
ZEUS shows the scale weight temporarily and then returns to selection.
Second Weighing
Vehicle has been loaded, or unloaded. To complete weight acquisition, follow these
steps:
Press F2 key (perform second weighing)
System prompts for input of memory number assigned to vehicle at the time of first
weighing.
Memory No.:0
a) You remember the number:
Overwrite by memory number.
Sample display:
Memory No:17
Display shows relevant vehicle number, for you to check.
VehNo: 345 XYZ
Correct, if need be, and acknowledge.
BV-H2322 AA 0630
- 58 -
Scale Specific Control
®
DISOMAT Opus – Operating Instructions
© Schenck Process GmbH, Darmstadt