Operating Activities - Schenck Process DISOMAT Opus Instructions De Service

English Scale Specific Control

2.4.3.3 Operating Activities

There are three types of printout and one print repeat function. For information on
formatting, see manual BV-H2313, Item 5.2.1.
Single Printout
After every fill operation, aborted or completed, system automatically performs a
single printout (weighing report). For single printout, DISOMAT uses form format 2.
Totals Printout
After one (or multiple) weighing operations, you can print total by pressing
[SHIFT]+[F3] (function key F6). System outputs the cumulative weight value of all fill
operations. Then, totals value (balance) is cleared, i.e. the totals weight of all weighing
operations performed and the number of fill operations are set to zero. For total
printout, DISOMAT uses form format 3.
Sub-Totals Printout
[SHIFT]+[F1] (function key F4) lets you print current balance total at any time. After
one (or multiple) weighing operations, you can print sub-total using menu item
'33:Print3'. Print pattern is the same as with totals printout, however, the totals
memory is not cleared.
®
DISOMAT Opus – Operating Instructions 0630 BV-H2322 AA
© Schenck Process GmbH, Darmstadt - 49 -