Schenck Process DISOMAT Opus Instructions De Service page 65

English
Release Weighing Operation
System prompts for release of weighing operation.
Select using arrow keys.
Contin: Weigh
Contin: Abort
Contin: Weight
Acknowledge selection.
After
Contin: Weigh
ZEUS starts printing, returns to home position and is ready to start next weighing
operation.
After
Contin: Abort
all data entered are deleted. ZEUS returns to home position and is ready to start next
weighing operation.
Weighing Using Fixed Tare Weight
Procedure is similar to that of First/Second Weighing. First weighing is replaced by
initial acquisition of vehicle empty weight.
Follow these steps:
+ Use 'SHIFT' and 'LEFT arrow' keys to go to menu item FIXED
TARE FILE.
Acknowledge with ENTER.
System prompts for input of vehicle number.
VehNo.: 345 XYZ
Acknowledge input.
®
DISOMAT Opus – Operating Instructions
© Schenck Process GmbH, Darmstadt
Scale Specific Control
0630 BV-H2322 AA
- 61 -