Schenck Process DISOMAT Opus Instructions De Service page 61

English
Identify Vehicle
System prompts for input of vehicle number (e.g. licence plate number).
Example:
VehNo: 345 XYZ
(Max. 10 digits)
Alternatively, you can enter a 14-digit wagon number.
Example:
Wagon: 518195-80447-1
Press key once. Acknowledge input.
Identify Load (material number and type)
System prompts for input of material number. The material number can be used to
output cumulative total (weighing result of stored materials, numbers 1 to 25, is
summated) and printed on weigh slip.
Mat.:0
(Number 0..25 or -1)
Material names are assigned to numbers 1 to 25. For details, please see Further
Functions.
Example:
Mat:3
Materials not stored can be designated direct by input of material number -1.
Mat:-1
Acknowledge suggested value (0 = no material input) or overwrite.
After input of -1, system prompts for input of material name to be printed on weigh slip.
Text : _________
(Max. 20 digits)
Acknowledge input.
Keep in mind vehicle number displayed for two seconds. If not, you have to enter
complete vehicle number again at the time of second weighing.
Memory No.:17
ZEUS can assign up to 99 memory numbers, i.e. maximum 99 vehicles with first and
second weights can be stored.
®
DISOMAT Opus – Operating Instructions
© Schenck Process GmbH, Darmstadt
Scale Specific Control
0630 BV-H2322 AA
- 57 -