Crane Scale; Function Keys - Schenck Process DISOMAT Opus Instructions De Service

English

2.4.4 Crane Scale

2.4.4.1 Function Keys

With the Crane Scale, the function keys are assigned as follows:
Cab control keys:
Pendant keys
You can operate your crane scale via pendant or remote control unit. Using the
pendant keys you can perform the functions "Acquire Tare', 'Clear Tare', 'Test', 'Zero
Scale' and 'Acknowledge', and print weighing reports on connected printer, if any.
The pendant caters for the following symbols:
BV-H2322 AA 0630
- 50 -
'Enter tare value in manual'
F1 key: 'Manual Tare Input'
'Enter string'
F2 key: 'String'
'Select tare value from list'
F3 key: 'TareList'
'Weigh and print'
F4 key: 'Weigh'
Print and store weigh data. Scale is ready for next weighing
operation as soon as crane is relieved.
'Print sub-total'
F5 key: 'Sub-Total'
Print total and clear balance.
F6 key: 'PrintTot'
'Acquire/Clear Tare' key
This key has two functions:
If not tare has been acquired yet, key operation acquires tare:
Display reads NET.
If tare has been acquired, key operation clears tare memory:
Display reads GROSS.
DISOMAT
Scale Specific Control
®
Opus – Operating Instructions
© Schenck Process GmbH, Darmstadt