CAMPAGNOLO BORA ULTRA 80 Manuel Pour L'utilisateur page 23

• When riding in wet conditions, remember that the stopping power of your brakes is greatly reduced and the adherence of the tires to the ground is considerably reduced. This makes it
harder to control and stop your bicycle. Extra care is required when riding your bicycle in wet conditions to avoid an accident. An accident could result in severe personal injury or death.
WARNING!
When operating on the brake lever, make sure that the two blocks SIMULTANEOUSLY GET IN CONTACT with the rim surfaces. If that is not done, check that your
brakes are correctly centred according to the instructions indicated by the brakes manufacturer.
Note
We recommend that you contact a specialized mechanic for all the assembly, disassembly and all hub, rim and spoke replacement operations. Choose with him
the most suitable interval of inspections for you on the basis of the conditions of use and intensity of your activities (e.g. racing, rain, salted roads, muddy roads,
cyclist's weight, etc.).
ATTENTION! NOTE FOR SPECIALIZED MECHANICS
CONTACT YOUR CAMPAGNOLO SERVICE CENTER FOR THE INSTRUCTIONS FOR ASSEMBLING, MAINTAINING AND REPLACING RIMS, SPOKES AND HUBS, OR YOUR
®
CAMPAGNOLO DEALER.
• If the hub bearings are CULT (in Cronitect
balls lubricated with specific oil for bearings.
• If the hub bearings are USB or Standard, periodically take the bicycle to a specialised mechanic to have the hub bearings and the balls lubricated with specific grease for bearings.
• Keep the braking surface of the rim and the brake pads free from oil and grease.
• At the end of the lubrication operations, CAREFULLY degrease the braking rim and the brake blocks.
10
6 - MAINTENANCE
, advanced solution by FAG and the balls in ceramic), periodically take the bicycle to a specialised mechanic to have the hub bearings and the
®