CAMPAGNOLO BORA ULTRA 80 Manuel Pour L'utilisateur page 19

3 - FITTING THE WHEEL ON THE FRAME / USING THE QUICK RELEASE
See the "Quick Release" instruction sheet.
4 - SPROCKET ASSEMBLY AND REMOVAL
4.1 - 9S / 10S SPROCKETS OF CAMPAGNOLO S.R.L. (ON FW BODY FOR 9S / 10S SPROCKETS OF CAMPAGNOLO S.R.L.)
Refer to the instruction leaflet enclosed with the sprockets for all the assembly, disassembly, use and maintenance operations.
®
4.2 - 11s SPROCKETS of Campagnolo s.r.l. (on FW body for 11s sprockets of Campagnolo s.r.l.)
4.2.1 - ASSEMBLY
1) The sprockets are pre-assembled and timed on the plastic support (A
- Fig. 2). The ring G (Fig. 2) is provided with a preassembled washer (H);
G
ensure that it is positioned as in fig. 2.
G
2) Remove the ring (G - Fig. 2).
3) Insert the support on the side of the freewheel body, align the spline
patterns, press the sprockets onto the freewheel and extract the support
(A) from the hub (Fig. 2).
H
A
2.1
A
2
6