CAMPAGNOLO BORA ULTRA 80 Manuel Pour L'utilisateur page 16

Bora Ultra H80 mm
RIM:
Bora Ultra H35 mm / H50 mm
Bora One H35 mm / H50 mm
O.L.D:
INFLATION PRESSURE:
USE:
Only for H50 mm and H80 mm versions
Check what extension you need according to the
length of the inner tube valve (if it is necessary
to use a female extension) and the height of the
rim profile.
WARNING!
Only use genuine Campagnolo spokes for your specific type and model of wheel. Failure to use correct spokes can result in an accident, personal injury or death.
®
To correctly assess wheel tension a tensiometer must be used: do not go by the tension you feel manually. It is therefore essential to have all the spoke replace-
ment operations carried out by a Campagnolo Pro-Shop, a Campagnolo Service Centre or a mechanic specialised in assembly and maintenance on Campagnolo
wheels. The spoke part numbers can be found in the spare parts catalogue which is downloadable from our website www.campagnolo.com.
Ø: 634 mm
Ø: 634 mm
front
: 100 mm
see the inflation pressure recommended by the producer of the tire.
road racing on smooth road or track surfaces only.
Female extension
(OPTION)
UT-WH130F
UT-WH140F
UT-WH150F
UT-WH160F
larghezza: 19 ±0,5 mm
larghezza: 24,2 ±0,5 mm
rear
: 130 mm
L
37 mm
67 mm
92 mm
80 mm
L
3