Checking The Motor's Direction Of Rotation; Basic Settings (End Limits And Angular Travel) - SOMFY HOME MOTION J4 io Notice Installateur

5.3. Checking the motor's direction of rotation

• Press the Up button:
a) If the blind raises, the direction of rotation is correct:
go to the section entitled 5.4 "Basic Settings".
b) If the blind lowers, the direction of rotation is incorrect:
press the "my" button until the blind moves, the direction
of rotation is modified.
• Press the Up button to check the direction of rotation.
5.4. basic settings
5.4.1. Setting upper and lower end limits
Check that your J4 io actuator has been assembled in
the blind in the lowered position with the slats closed.
• Press the Up button for 3 seconds. The blind rotates in
the up direction.
• Stop the blind using the stop on the "mushroom" button.
The end limits are set. The upper end limit is stored on
the mushroom.
© 2011 Somfy SAS. All rights reserved. 112011
a
=
b
=
Setting the end limits
a
=
b
=
65