Checking The Rotation Direction; Adjusting The End Limits - SOMFY Roll Up 28 RTS Notice D'installation

Masquer les pouces Voir aussi pour Roll Up 28 RTS:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14

5.2. Checking the rotation direction

Press the RTS transmitter UP button:
a) If the shade raises (a), the rotation
direction is correct: move to the section
entitled 5.3 «Adjusting the end limits».
b) If the shade is lowers (b), the rotation
direction is incorrect: move to the next step.
b1) Press the RTS transmitter MY
button until the shade jogs: the rotation
direction has been modified.
b2) Press the RTS transmitter UP button
to check the rotation direction.

5.3. Adjusting the end limits

The end limits can be set in any order.
1)Press and hold the UP button to move the
shade to the desired position. If necessary
adjust the Up position, using the UP or
DOWN buttons.
2)Press the MY and DOWN buttons
simultaneously and release them once the
shade begins to move.
The up limit is memorized.
3)Press the MY button when the shade
reaches the desired Down position.
If necessary adjust the down position, using
the UP or DOWN buttons.
4)Press
the
MY
simultaneously and release them when the
shade begins to move.
The Down limit is memorized. The shade
moves up and will stop at its upper limit.
5)To confirm the end limits, press and hold
the MY button until the shade jogs.The end
limits are recorded.
Copyright © 2013 Somfy SAS. All rights reserved - V1 - 02/2013
and
UP
buttons
a
=
b
=
b1
1
3
5
b2
2
4
7

Publicité

Table des Matières
loading

Table des Matières